I have a doubleweave sampler on my table loom which I need to finish to free up the loom, and having gone through lots of exercises in the excellent book Doubleweave, by Jennifer Moore, I am playing now in a freestyle way with rags and scraps of yarn.
Doubleweave is woven in two layers, and it can be used to create a thick double cloth with both layers joined across the width, or it can be used to create a cloth that is wider than the width of the loom, by turning a corner at one edge so that the bottom layer is joined to the top layer all along that edge but nowhere else. Essentially you are weaving a piece of cloth that is folded in half and when it comes off the loom you can open it out to its full width.
Here I’ve decided to divide the warp into short sections, weaving each with a different weft, I have 7 sections across the top (green) layer and three across the bottom (rust) layer – I thought 3 was enough of a challenge on the bottom, which I can only see by bending double and craning my neck or using a mirror – and by feel – ‘seeing’ with my fingers. It’s slow but satisfying to watch this cloth taking shape, and I’m not sure what will happen next, just weaving in the moment is enough.
Doubleweave by Jennifer Moore – if you’re interested in the book I’ve been following, using this link helps to support my blog.